When processing spiral blades, be sure to pay attention to electrical safety.

Aug 31,2024

Facebook Linkedin Twitter Tumblr Pinterest
Electricity is like a tiger—once it bites, it won’t let go. No matter what we’re doing, we must take proper precautions to prevent electric shocks. 1. Switches must be insulated and their installation should be secure. After finishing work, always check whether the power switch is turned off. 2. Before opening any electrical cabinet, make sure the power supply is completely isolated from the equipment. The main power source for the device must be switched off, and a clear "Do Not Enter—Unauthorized Personnel Only" sign should be posted on the equipment.

Electricity is like a tiger—once it bites, it won’t let go. No matter what we’re doing, we must take proper precautions to prevent electric shocks.

1. The switch must be insulated, and its installation should also be secure. After finishing work, always check whether the power switch is turned off.

2. Before opening the electrical cabinet, make sure the power supply is completely isolated from the machine. The main power to this equipment must be turned off, and a sign should also be posted on the device warning that unauthorized personnel are prohibited from entering.

3. Inspection and maintenance personnel must undergo professional training before they can take up their posts.

4. We must follow national regulations when performing the installation.

5. Most importantly, the power supply must be grounded.

6. Never touch the connected circuit directly with your hands.

 

Tags:

Previous entry

The Relationship Between Double-Blade Augers and Single-Blade Augers

Regarding the use of sludge dewatering machines

Next episode

Previous entry:

The Relationship Between Double-Blade Augers and Single-Blade Augers

Next:

Regarding the use of sludge dewatering machines

More information

A Guide to the Standard Conveyor Angle Range for Screw Conveyors

A Guide to the Standard Conveyor Angle Range for Screw Conveyors

The tilt installation angle of a screw conveyor directly affects its conveying capacity, equipment failure rate, and overall service life. Different designs—whether with or without a shaft, U‑shaped or tubular—and materials with varying physical properties require significantly different standard tilt angles. In many production lines, improper tilt‑angle design leads to persistent issues such as material backflow, blockages, blade deformation, and motor overload. This paper systematically reviews the standard conveying‑angle ranges for all types of screw conveyors, along with material‑compatibility guidelines and optimized solutions for steep inclines, providing a standardized reference for equipment procurement and on‑site retrofitting.
Solutions for Spiral Blade Warping and Deformation | Dual Options: Custom-Made New Parts + Repair of Used Components

Solutions for Spiral Blade Warping and Deformation | Dual Options: Custom-Made New Parts + Repair of Used Components

Customized wear-resistant auger solutions for conveying highly abrasive materials

Customized wear-resistant auger solutions for conveying highly abrasive materials

Eliminate blade shedding and fracture! Eradicate defects such as cold solder joints and poor welds, and employ heavy‑duty welding processes to resolve the issue of equipment downtime in mining operations.

Eliminate blade shedding and fracture! Eradicate defects such as cold solder joints and poor welds, and employ heavy‑duty welding processes to resolve the issue of equipment downtime in mining operations.